LA Dab Guide

Comparison

Quartz vs titanium vs ceramic

Updated November 1, 2026

Short answer

Quartz is the default for most people: it heats quickly, costs little and adds no flavor when clean. Titanium is close to unbreakable but can affect flavor. Ceramic holds heat well but is slow to heat and fragile.

What each dabbing surface is good at, and where it falls short.

On this page
  1. The three materials side by side
  2. Why most people use quartz
  3. Where titanium makes sense
  4. Where ceramic makes sense
  5. What about e-rigs?

The three materials side by side

QuartzTitaniumCeramic
Heat upFast to mediumFastSlow
Holds heatDepends on thicknessLess than ceramicWell
DurabilityBreaks if dropped or shockedNearly unbreakableFragile
FlavorNeutral when cleanCan affect flavorDepends on the piece
CostLowVariesVaries
Best forAlmost everyoneRough handlingSlow, low-temp dabs

Why most people use quartz

Quartz handles heat well and does not add a taste of its own when it is clean. It is also cheap enough to replace. Its weak points are knocks, sudden temperature shocks and contamination, which is why you handle it by the joint end and never put cold liquid on it hot.

Where titanium makes sense

Titanium survives drops that would end a banger. Some people find it changes the taste of a dab, and quality varies between makers, so buy from one that states the grade it uses. Do not take it to a glow.

Where ceramic makes sense

Ceramic holds heat for a long time, which suits slow pulls, but takes patience to heat and can crack from a drop or a shock.

What about e-rigs?

E-rigs use the same materials in a different form. Dr. Dabber sells quartz, sapphire and titanium inserts for the Switch². Its support page recommends the titanium insert for flower and for concentrates with high plant matter. Check your own manual before swapping parts.

Sources