Reference
Dab FAQ
Updated November 1, 2026
Quick, straight answers to the dab questions people search most. Each one links to the full guide if you want the details.
Temperature and timing
How hot should a banger be?
For the best flavor, aim for roughly 450 to 550°F. Medium temps of about 550 to 650°F give more vapor with less taste. Above about 650°F you get bigger clouds and harsher hits, and past 750°F you are scorching. The dab temperature guide has a full chart.
How long should I heat a banger?
Roughly 20 to 45 seconds with a standard butane torch, depending on thickness. Thin 2mm bottoms need about 20 to 30 seconds, while thick 4mm or core bangers need 35 to 60. These are common starting points. Move the flame around the bottom so it heats evenly. Details are in the torch guide.
How long should I wait after heating a banger?
Roughly 25 to 60 seconds for a flat top, depending on thickness and how long you heated it. Core and thermal bangers can take up to about 90. Thicker quartz needs a longer wait. The cool-down timer gives you a starting point, and your taste does the rest.
What is the difference between a cold start and a hot start?
A hot start heats the empty banger, waits for it to cool, then drops the dab. A cold start puts the dab in a cold banger first, caps it, and heats until it starts to vapor. Cold starts are easier and great for flavor; hot starts are quicker once you know your timing. Read cold start vs hot start.
How do I know if my banger is too hot?
The hit is harsh, peppery or burns your throat, and the vapor comes in fast. If the quartz is glowing, it is far too hot. Wait 10 to 15 seconds longer next time.
Do I need a thermometer to dab?
No. Most people use timing and taste. A thermometer helps when you are learning, but cheap infrared guns can read clear quartz inaccurately, so use it for consistency rather than an exact number.
Gear
What is the best banger for beginners?
A plain quartz flat top with a bucket around 25mm across, a 3 or 4mm bottom, and a joint that matches your rig's size, gender and angle. Pair it with a carb cap that fits. It is forgiving, easy to clean and works with every technique. See bangers explained.
What size joint does my rig have?
Most dab rigs use a 14mm joint, usually female. Some smaller rigs use 10mm, and some larger ones use 18mm. If you are not sure, test with a banger or adapter you know the size of. The dab rig guide explains sizes and genders.
Do I really need a carb cap?
For low-temp dabs, yes. A cap traps heat and directs airflow, so the dab vaporizes fully instead of leaving a puddle. A directional cap that fits your bucket is the best all-around choice. Read the carb cap guide.
Are terp pearls worth it?
They help a little by spreading the oil over the hot floor, and they look fun. They are not essential. Plain quartz pearls are fine; expensive gemstone pearls are mostly about looks.
Is an e-rig better than a torch and banger?
An e-rig is easier and more consistent, with no open flame. A torch and banger costs less up front and gives you more control. Beginners and apartment dabbers often prefer e-rigs; tinkerers often prefer glass. Read e-rigs explained.
How long does a quartz banger last?
Months to years with good care. Swab it after every dab, never touch the bucket with your fingers, and never put cold liquid on hot quartz. Replace it if it cracks or gets so cloudy that heat feels uneven.
Cleaning and problems
How do I clean a banger?
Swab it with a dry cotton swab while it is still warm after every dab. For a deep clean, let it cool completely, soak it in isopropyl alcohol with a little coarse salt, swab it out, rinse with warm water and let it dry fully before any flame. Never put alcohol on hot quartz. Full steps are in the cleaning guide.
How do I season a quartz banger?
Rinse it in isopropyl and dry it fully, with no alcohol smell and no flame nearby. Mount it on the rig, heat it evenly for 30 to 45 seconds to burn off any oils, and let it cool completely. Repeat two or three times, then take a small first dab and swab right after. The full steps are in the banger guide.
Why is my dab harsh?
Usually the banger is too hot, the banger is dirty, the dab is too big, or you are pulling too hard. Wait longer, swab every time, take smaller dabs and pull slow. The fix my dab troubleshooter narrows it down in two taps.
Why is there a puddle left in my banger?
The banger cooled too much, there was no cap, or the heat was uneven. Wait a bit less, use a carb cap, and move the flame around the whole bottom. A thin film at low temps is normal; a full puddle means adjust.
How often should I clean my dab rig?
Change the water every day you use it. If you dab daily, deep clean the rig with isopropyl and coarse salt about once a week. Swab the banger after every single dab.
Why does my torch keep sputtering?
There is usually air trapped in the tank, or the butane is cold or low quality. Purge the torch, refill it with refined butane, and wait a few minutes before lighting.
Storage and safety
How should I store dabs in hot weather?
Use a small, airtight glass jar in the coolest, darkest spot in your home. During a long heat wave, the fridge works; let the sealed jar warm up before opening so no condensation forms. Never leave concentrates in a parked car. See storing concentrates in LA.
How big should a dab be?
Start with about the size of a grain of rice. Concentrates are strong, and small dabs taste better and are easier to vaporize fully. Wait a few minutes before taking another.
Also useful: How to dab, step by step, Dab safety, Shopping for dab gear in LA, Glossary.