LA Dab Guide

Troubleshooting

Cracked banger: stop using it

Updated November 1, 2026

Short answer

Do not use a cracked banger, even if the crack looks small. Heat stress concentrates at a crack, and the banger can fail completely while hot. Let it cool, remove it by the joint end and replace it.

What to do with a cracked banger, and how to avoid cracking the next one.

On this page
  1. What to do
  2. How to spot a crack
  3. Why bangers crack

What to do

  1. Turn off the torch

    Set it down and lock it.

  2. Let the banger cool completely

    Do not cool it with water or alcohol.

  3. Remove it carefully

    Hold it by the joint end. Check the joint on the rig for chips or damage.

  4. Replace it

    Match the joint size, gender and angle, and look for clean welds on the new one.

How to spot a crack

Check it cold, under bright light, away from the rig. Look along the floor, around the bucket and where the arm joins the bucket. A crack catches the light as a thin line that does not wipe away. A cloudy patch is different. That is devitrification.

Why bangers crack

CauseHow to avoid it
Thermal shock from cold liquid or cold pearls on hot quartzKeep water and alcohol away until it is cool; add pearls before heating
Knocks and dropsKeep the rig at the back of the table, and move it by the base or neck
Bad welds on cheap quartzCheck welds before you buy
Repeated overheatingStop well before it glows
A joint jammed in, then heatedSeat it gently, without twisting hard

If you are shopping for a replacement, the shopping guide covers what to look for in person.