Comparison
14mm vs 18mm vs 10mm bangers
Updated November 1, 2026
Short answer
Your banger has to match your rig's joint size and be the opposite gender. Most dab rigs use a 14mm female joint, which takes a 14mm male banger. 14mm has the widest choice of bangers and accessories, so pick it for a first rig.
Size, gender and angle are the three things to match. Get them right once and every banger you buy will fit.
The three sizes
| Size | Where you see it | What it means for you |
|---|---|---|
| 10mm | Tiny rigs, some travel pieces | Fewer bangers to choose from |
| 14mm | Most dab rigs | The widest selection |
| 18mm | Bigger rigs, many bongs | Bangers exist, but most dab gear is built around 14mm |
The names are a standard, not exact measurements, so a 14mm joint does not measure exactly 14 millimeters across.
Male or female
A female joint is a socket and the banger slides inside it. A male joint sticks out and the banger slides over it. Buy the opposite of what your rig has: a female rig takes a male banger. Most modern dab rigs are female.
45 or 90 degree
Set the rig on a flat counter and look at the joint from the side. If it points straight up, you want a 90. If it angles out, you want a 45. The floor of the banger should sit level, or the oil will pool on one side.
How to check what you have
The fastest check is a banger or adapter you already know the size of. It should seat smoothly without rocking. Seat it gently and do not twist it in hard, since a joint jammed in and then heated can crack. If the sizes do not match, a glass adapter can convert one to the other, but it adds height and extra glass.