LA Dab Guide

Device help

How to clean a Puffco Peak Pro

Updated November 1, 2026

Short answer

Swab the chamber with 90%+ isopropyl for light cleaning, and soak the removed chamber in 90%+ isopropyl for 20 minutes for a deep clean. Never use water on the chamber. Let it air dry completely before putting it back on the base.

These steps follow Puffco's own Peak Pro 3DXL support page. Puffco calls 99% isopropyl the best choice, because lower strengths contain more water.

On this page
  1. What you need
  2. The cleaning steps
  3. How often to clean it
  4. Mistakes to avoid

What you need

90%+ isopropyl alcohol (Puffco prefers 99%), cotton swabs, a small container for soaking and water for the glass only.

Flame and alcohol

Isopropyl is flammable. Let the device cool before any alcohol touches it, keep the alcohol capped and away from any torch, stove or pilot light, and do not heat anything until every part is fully dry and the alcohol smell is gone.

The cleaning steps

  1. Let it cool, then take it apart

    Let the device cool fully, then take off the cap and glass and unscrew the chamber from the base.

  2. Light clean

    Use a cotton swab with 90%+ isopropyl to gently remove residue.

  3. Deep clean when needed

    Submerge the removed chamber in 90%+ isopropyl for 20 minutes. Never use water on the chamber.

  4. Clean the base

    With the glass and chamber off, gently clean the gold threads using cotton swabs soaked in 90%+ isopropyl, and clean the air path between chamber and glass. Do not let water get into the gold threads.

  5. Clean the glass

    Remove the glass, soak it in 99% isopropyl, then rinse with water until no alcohol remains. Keep water out of the bottom chamber of the glass, and let it dry fully before reattaching.

  6. Dry everything

    Let the chamber air dry completely before you put it back on.

How often to clean it

Puffco's rule of thumb is a thorough clean each time the battery fully runs down. Soak the chamber any time you notice heavy flooding. A red and white connection error is also a reason to soak it. See what the lights mean.

Mistakes to avoid

  • Pouring alcohol into a chamber that is still on the base.
  • Rinsing the base or chamber with water.
  • Reattaching a chamber that is still wet.
  • Opening the base, which Puffco says voids the warranty.

Sources