Gear guide 02
Quartz bangers: which to buy and how to season one
Updated November 1, 2026
Short answer
A banger is the quartz bucket you heat and dab from. For most people the best first banger is a plain flat top, around 25mm across, with a 3 to 4mm bottom and a joint that matches your rig. Season it once by heating it clean, then swab it after every single dab and it will last a long time.
Your quartz banger matters more to flavor than your rig does. This guide covers quartz quality and thickness, every common style, bucket size, how to season a quartz banger, and the best banger for beginners.
On this page
What a banger does
A banger is a quartz bucket on an arm that plugs into your rig's joint. You heat it with a torch, let it cool to the right temperature, drop in your dab, and cover it with a carb cap. The quartz holds heat and releases it into the concentrate, turning it into vapor.
It is called a banger because of the shape, not because anything bangs. Older setups used a nail, a flat dish with a dome over it. Bangers replaced them because they heat faster, are easier to cap, and need no dome.
Why quartz? It handles heat well, though not sudden shocks, it does not add flavor of its own when clean, and it is cheap compared to the alternatives. Titanium heats fast and is nearly unbreakable but can affect flavor; ceramic holds heat beautifully but is fragile and slow. Quartz is the default for good reason.
Quartz quality and thickness
Not all quartz is equal. Good bangers are made from clear fused quartz tubing, worked carefully so the welds are clean and the walls are even. Some makers state the specific tubing grade they use, and that is a decent sign that someone cares. Cheap bangers sometimes use lower quality quartz with bubbles and haze, or rough welds that crack under heat.
What to look for
- Clarity. Hold it up to light. It should look like clear glass, not milky or bubbly.
- Clean welds. Where the arm joins the bucket, the seam should be smooth and even, with no thin spots.
- Flat, even floor. The bottom of the bucket should sit level when the banger is on your rig.
- Frosted joint. The ground section should be evenly frosted. A wobbly fit leaks air and stresses the joint.
Thickness
Banger thickness usually refers to the floor, the part that actually holds heat. You will see bottoms from about 2mm up to 5mm or more. Here is the trade:
| Bottom | Heat up | Holds heat | Good for |
|---|---|---|---|
| 2mm | Fast | Short | Quick dabs, small amounts, people in a hurry |
| 3mm | Medium | Medium | All-around use |
| 4mm | Slower | Long | Low-temp dabs, beginners, consistent results |
| 5mm+ | Slowest | Longest | Low-temp flavor chasers with patience |
Thicker bottoms are more forgiving. The temperature drops slowly, so you have a wider window to drop your dab at the right moment. Thin bangers go from too hot to too cold quickly. That is why a 3 to 4mm bottom is the sweet spot for most people.
Many bangers also have an opaque or sandblasted bottom. It is mostly cosmetic, but it can make the heat more even and hides some staining.
Banger styles
Flat top
The standard. A simple bucket with a flat floor and a flat top edge for the cap to sit on. It is easy to heat, easy to clean, and works with almost every cap. If you only ever own one banger, this is it.
Core reactor
A flat top with a solid quartz core fused into the bottom. The core adds thermal mass, so the banger holds heat longer and releases it more evenly. It takes more torch time and longer to cool, and the core can make swabbing a little fiddlier. Good for low-temp dabbers who like a consistent, slow pull.
Terp slurper
A wide, shallow dish with a hollow pillar running down into the arm. Air pulls through the dish and down the pillar, and you use a slurper set (usually a marble on top and small pillars or pearls inside) to control the airflow and spin the oil. It heats fast, cools fast and makes big, flavorful hits.
Honest take: slurpers are great once you learn them, but they are fussier. They need specific accessories, the airflow changes with the set you use, and the timing is less forgiving. Not a first banger.
Thermal or double wall
Two layers of quartz, one inside the other, with a gap between. You heat the outer wall, and the heat moves inward to the inner bucket. They hold heat a long time and give smooth, consistent low-temp dabs. They take longer to heat, longer to cool, and are harder to clean if reclaim gets between the walls.
Other styles you will see
- Round bottom. A curved floor that pools oil in the center. Helps with small dabs.
- Bevel or slanted top. An angled top edge, made for directional caps and spin.
- Quartz inserts. A small cup that sits inside a flat top. Keeps the banger cleaner and adds thermal mass.
- Blender style. Made to spin the oil with airflow holes. Similar idea to a slurper with its own accessories.
Bucket size
Bucket size is the outside diameter of the cup. You will commonly see sizes from around 20mm to 30mm, and 25mm is the most common. Bigger buckets handle bigger dabs and give more surface area. Smaller buckets heat faster and are better for small dabs.
The important part is matching your carb cap to the bucket. A cap that is too small falls in. A cap that is too big will not seal. When you buy a banger, either buy a cap made for it or check the cap's listed fit. The carb cap guide covers this.
How to season a new quartz banger
"Seasoning" means getting a new banger ready for its first dab. Mostly, it is about burning off anything left from manufacturing and handling, like oils and fingerprints. It is not like seasoning cast iron; you are not building a coating. You are making it clean.
Rinse and dry it
Rinse the banger in isopropyl alcohol to remove any dust or residue, then let it dry completely. Keep the alcohol capped and away from the torch, and do not light it until the banger is fully dry and the alcohol smell is gone. Handle it only by the joint end from now on.
Mount it on your rig
Seat it in the joint, check that the bucket sits level, and make sure the rig is on a stable surface.
Heat it evenly
Heat the bucket with your torch, moving the flame around the bottom and lower walls for about 30 to 45 seconds. You are burning off anything left on the quartz.
Let it cool completely
Let it cool all the way down. Do not rush this with water or alcohol. Quartz handles heat well but sudden shocks are still a bad idea.
Repeat two or three times
Heat and cool a few times. This makes sure everything is burned off.
Take a small first dab
Heat to your normal temperature, wait, and take a small dab. Swab the banger immediately afterward. You are now ready to go.
Never touch the bucket of a banger with your fingers, even when it is cold. Skin oils bake into quartz and cause permanent white cloudy spots called devitrification. Hold it by the joint end only.
How long bangers last
A good quartz banger can last months to years if you treat it right. What kills them is not heat, it is contamination and mistakes.
Things that shorten its life
- Devitrification. Quartz turns cloudy and white over time, especially where it was contaminated with oils, residue or salt. A little is normal. A lot makes the banger hold heat unevenly.
- Reclaim baking. Torching a dirty banger burns the residue into the quartz. It stains and becomes harder to clean.
- Thermal shock. Dumping cold liquid on hot quartz, or dropping a cold insert into a red hot banger, can crack it.
- Knocks. The arm where it meets the joint is a weak spot. Bangers often die from being dropped, not from heat.
When to replace it
Replace your banger if it has a visible crack, if it is so cloudy that heat seems uneven, or if residue is baked in so deep that soaking does nothing. A crack anywhere means stop using it immediately. Heat stress concentrates on cracks, and a banger that breaks while hot is not something you want on your table.
Best banger for beginners
If you are just starting, get a plain flat top. Around 25mm bucket, 3 or 4mm bottom, joint size and angle matching your rig, from a maker that shows clean welds in its photos. Pair it with a carb cap made to fit.
That setup is forgiving, works with every technique on this site, and is easy to clean. Spend money on a good flat top before you spend money on a fancy one. You can always add a slurper or a core reactor later once you know how you like your dabs.
Next up: learn how long to heat a banger, then read the dab temperature guide so you know what you are aiming for. If you would rather skip the timing game, a cold start works great on a flat top.
Also useful: Dab safety, Flat top vs core reactor vs slurper, Quartz vs titanium vs ceramic, Why is my banger turning white?, Cracked banger: what to do.