LA Dab Guide

Technique guide 02

Cold start vs hot start dabs

Updated November 1, 2026

Short answer

A cold start is the easiest way to get a flavorful low-temp dab with no timing: load a small dab into a cold banger, cap it, and heat the bottom until it starts to vapor. A hot start gives you more control and cleaner quartz once you know your timing. Beginners should start cold; most regulars use both.

A cold start dab means loading the concentrate into a cold banger and then heating it. A hot start means heating the banger first, waiting, then dropping the dab. This guide walks through both step by step and explains when to use which.

On this page
  1. The two methods in one sentence each
  2. How to cold start a dab
  3. How to hot start a dab
  4. When to use which
  5. Pros and cons
  6. Common mistakes
  7. Which is better for beginners?

The two methods in one sentence each

Hot start: heat the empty banger, wait for it to cool to the right temperature, drop the dab, cap it, pull. This is the traditional way.

Cold start: drop the dab into a cold banger, cap it, heat the banger until the dab starts to turn to vapor, then pull. It flips the order.

Both work. Both make great dabs. The difference is in how much timing, control and cleanup each one needs.

How to cold start a dab

Cold starts became popular because they take the guesswork out of temperature. You do not wait, and you do not need a timer. The dab tells you when it is ready.

  1. Start with a clean, cool banger

    The banger should be at room temperature and clean. Leftover residue burns before your fresh dab melts.

  2. Load a small dab

    Put a small dab, about the size of a grain of rice, in the center of the banger floor.

  3. Put on the carb cap

    Cap the banger. A directional or solid cap works well.

  4. Heat the bottom gently

    Turn the torch on and heat the bottom of the banger, moving the flame in small circles. Watch the dab.

  5. Stop when it starts to vapor

    After roughly 10 to 20 seconds, the dab melts and you see wisps of vapor in the banger. Stop heating and set the torch down safely.

  6. Pull slowly

    Pull slow and steady through the mouthpiece. Rotate or lift the cap to keep the oil moving and finish the dab.

  7. Swab while warm

    When you are done, swab the banger with a cotton swab while it is still warm to remove leftover residue.

Pro tip

If you want more flavor, stop heating the moment you see the first vapor. If you want a bit more vapor, heat a few seconds longer. That is the whole adjustment.

How to hot start a dab

The hot start is the traditional method. It takes a bit of practice, but once you know your timing, it is quick and consistent.

  1. Load your dab tool first

    Have the dab ready on your tool before you heat. You do not want to be scrambling with a hot banger.

  2. Heat the empty banger

    Heat the bottom of the banger evenly for about 20 to 45 seconds on a flat top, depending on thickness.

  3. Turn off the torch and wait

    Lock the torch and set it down. Wait roughly 25 to 60 seconds on a flat top, or use the cool-down timer.

  4. Drop the dab

    Drop the dab onto the floor of the banger. Touch the tool to the quartz and roll it off.

  5. Cap it and pull

    Cap the banger right away and pull slowly. Rotate the cap to move the oil.

  6. Swab while warm

    Swab the banger with a cotton swab while it is still warm.

If you want help with the waiting part, the banger cool-down timer gives you a starting point based on your banger style and thickness.

When to use which

Use a cold start when

  • You are new and do not know your timing yet.
  • You want the most flavor with the least fuss.
  • You are using a thick or thermal banger that takes ages to cool.
  • You are taking a small dab of something terpy, like live resin or rosin.

Use a hot start when

  • You know your timing and want a quick, consistent dab.
  • You are taking bigger dabs that need more heat.
  • You want a cleaner banger with less residue left behind.
  • You are using a terp slurper, which works best hot.

Pros and cons

Cold startHot start
EaseVery easyTakes practice
FlavorExcellent at low tempExcellent when timed right
Timing neededNoneYes
Big dabsHarderEasier
Residue leftMoreLess
Banger stainingMore over timeLess
Torch near the dabYes, during heatingNo, torch is off

The honest downsides of cold starts

Cold starts leave more residue in the banger because the oil melts slowly and some of it never fully vaporizes. Over time, that can stain the quartz, especially if you do not swab every time. They also do not work well with big dabs, which take longer to vaporize and tend to puddle.

Another thing: during a cold start, you are heating the banger with the dab already in it. If you keep heating after the vapor starts, you scorch the dab. Stop early.

The honest downsides of hot starts

Hot starts need timing. Too short a wait and you get a harsh hit. Too long and you get a puddle. It takes a few tries to find your numbers, and they change if you switch bangers or torches.

Common mistakes

Cold start mistakes

  • Heating too long. Stop when you see vapor. Keep going and you burn it.
  • Dirty banger. Old residue burns first and ruins the flavor.
  • Too big a dab. Keep it small.
  • No cap. Cold starts rely on the cap to trap heat.

Hot start mistakes

  • Not waiting long enough. Most harsh hits come from impatience.
  • Waiting too long. Puddles mean the banger cooled too much.
  • Uneven heating. Move the flame around the bottom.
  • Slow drop. Have the dab ready on your tool before you heat.
Don't do this

Do not cold start in a banger that is still warm from the last dab. It is neither a cold start nor a hot start, and the result is unpredictable. Let it cool fully, or switch to a hot start.

Which is better for beginners?

Cold start, easily. You do not need to learn timing, you get great flavor right away, and the dab tells you when it is ready. Once you are comfortable, try a hot start so you know both.

Most experienced dabbers use both, depending on the concentrate, the banger and how many people are in the sesh. A cold start for a quiet flavor dab on a Tuesday night. A hot start when friends are over and you are passing the rig around.

If something goes wrong with either one, run the fix my dab troubleshooter. And for the full picture on heat, read the dab temperature guide.

Also useful: How to dab, step by step, Cleaning your gear, Dab safety.