LA Dab Guide

Gear guide 05

How e-rigs work, and how to keep one running

Updated November 1, 2026

Short answer

An e-rig replaces the torch and banger with a battery and an electric heating chamber, so you get the same temperature every time at the push of a button. It is the easiest, most consistent way to dab, especially for beginners. The trade-offs are price, battery life, and chambers that wear out and need replacing.

This e-rig guide explains how electronic dab rigs work, what the chamber and atomizer actually do, how to think about heat settings, how to keep one running, and the honest pros and cons of the well-known options.

On this page
  1. How an e-rig works
  2. Parts of an e-rig
  3. Heat settings in plain English
  4. How to take a dab on an e-rig
  5. Well-known e-rigs, honestly
  6. Maintenance
  7. E-rig errors in general terms
  8. E-rig vs torch and banger

How an e-rig works

An e-rig, or electronic dab rig, does the same job as a torch and banger, but with electricity. A battery heats a small chamber to a set temperature. You load the dab into the chamber, put on the cap, press a button, and pull through a small water piece on top.

The big difference is consistency. With a torch, every dab depends on how long you heated and how long you waited. With an e-rig, the device controls the temperature for you. It will hit the same heat every time, as long as the chamber is clean and the battery is charged.

Cross-section diagram of an e-rig showing the glass attachment, carb cap, heating chamber, heating element, battery base and button
Fig. 1. A generic e-rig in cross-section. Exact layout varies between models.

Parts of an e-rig

The base

The base holds the battery and the electronics. It has a button and usually lights that show which heat setting is selected and when the device is ready. Most modern e-rigs charge over a cable, and some have wireless charging docks.

The atomizer and chamber

The atomizer is the heating unit. It includes the chamber (the small bowl where the dab goes) and the heating element beneath or around it. Chambers are usually ceramic, quartz or metal. Some devices use coils, others heat the whole chamber without a coil.

Ceramic chambers tend to give good flavor and even heat. Quartz chambers heat fast and taste clean. Metal chambers are durable. The chamber is the part that wears out over time, so check whether replacements are easy to find before you buy a device.

The glass attachment

A small water piece that sits on top of the base. It works like a tiny rig: vapor goes through a bit of water before reaching you. Fill it to the line or just over the holes. Too much water and it splashes.

The carb cap

Most e-rigs come with a cap that goes on the chamber after you load the dab. Like with a banger, it traps heat and helps the dab vaporize completely.

Heat settings in plain English

Most e-rigs have a few preset heat settings, often shown as colors. They vary by device, so check your manual, and follow your device's presets over the banger chart on our temperature page, which is for torch and banger setups only. Most presets follow the same pattern.

SettingWhat it doesBest for
LowestGentle heat, maximum flavor, smaller vaporTerpy concentrates like live resin, rosin and sauce
Low to mediumGood flavor, a bit more vaporMost daily dabs
Medium to highMore vapor, less flavorShatter, wax and bigger dabs
HighestBig clouds, harsher hits, flavor fadesWhen you want clouds over taste

Start low. You can always use a higher setting or a boost option if your device has one. Going too hot from the start burns off flavor you cannot get back. Some devices let you set custom temperatures through an app, which is great for fine-tuning but not something you need on day one.

Pro tip

If your device has a "boost" or extend option, use it for the end of a dab rather than raising the main heat. It helps clear the chamber without scorching the first half.

How to take a dab on an e-rig

  1. Fill the glass

    Add water to the glass attachment, just enough to cover the holes.

  2. Load the dab

    Drop a small dab in the center of the chamber floor, not on the walls.

  3. Put on the cap

    Place the cap on the chamber to trap the heat.

  4. Pick a setting and start

    Select your heat and press the button to start the cycle. The device heats up.

  5. Pull when ready

    When the light or vibration says it is ready, pull slowly through the mouthpiece.

  6. Swab while warm

    After the dab, swab the chamber with a cotton swab while it is still warm. This keeps it clean.

Well-known e-rigs, honestly

There are many e-rigs on the market. Here are a few of the best-known names, described in general terms. Models get updated often, so check the specs of whatever version you buy.

Puffco Peak and Peak Pro 3DXL

Puffco's Peak line is the e-rig most people picture. It is easy to use, gives good flavor, and has a big community, so there are lots of accessories and replacement parts. The Peak Pro 3DXL adds app control for custom heat profiles and a larger chamber. See what its lights mean and how to clean it.

Pros: very easy to use, good flavor, consistent, lots of support and accessories. Cons: expensive, chambers wear out and need replacing, and the glass top is a common casualty when it falls over.

Dr. Dabber

Dr. Dabber makes several e-rigs, including the Switch². The Switch² uses induction heating and is listed for both concentrates and flower. Its default presets run from 400 to 540°F. See its lights and how to clean it.

Pros: well-made, with options for different needs, and the Switch² handles both concentrates and flower. Cons: also expensive, and some models have more of a learning curve.

Focus V Carta 2

The Carta line from Focus V is another popular option. It is known for app connectivity and for swappable atomizers, including a dry herb atomizer. Focus V suggests starting at its Blue preset, 425°F. See how to clean a Carta 2.

Pros: flexible, app control, swappable parts. Cons: app features take time to learn, and parts and accessories vary by version.

Budget e-rigs

Plenty of cheaper e-rigs exist. Some are fine. Many have weaker batteries, fewer replacement parts and inconsistent quality. If you go budget, look for a device that has replacement chambers available and reviews from people who have used it for months, not days.

Maintenance

An e-rig that is kept clean tastes better and lasts longer. Here is the routine.

Every dab

Swab the chamber with a dry cotton swab while it is still warm. The residue wipes right out. Waiting until it cools makes it harder.

Deeper cleans

With the device off and cool, clean the chamber more thoroughly with a cotton swab dipped lightly in isopropyl alcohol. Use only a little; you do not want alcohol dripping into the electronics. Let it dry completely before heating. Schedules differ by maker: Puffco suggests a thorough clean each time the battery runs down, and Focus V suggests every 25 to 50 seshes. Some devices have a cleaning cycle, and they do not all do the same thing. The Switch² cycle runs briefly at low heat to make swabbing and insert removal easier. Check your manual before you rely on one.

Weekly

Clean the glass attachment the way your maker says. Puffco, for example, says to keep water out of the bottom chamber of its glass. Change the water every day you use it.

When the chamber wears out

Over time, chambers get stained, crack or lose heating power. If your dabs taste off even after cleaning, or the device cannot hit its usual heat, it is time for a new chamber.

Don't do this

Never pour alcohol into a chamber that is on the base, and never rinse the base under water. Removed chambers are different, so follow your manual. Puffco says to soak the removed Peak Pro chamber in 90%+ isopropyl for 20 minutes, and Focus V soaks the removed Carta 2 atomizer in 70 to 90% isopropyl for 10 minutes. Both say no water. Let it air dry completely before it goes back on. Never leave an e-rig in a parked car in summer; heat is hard on batteries.

Charging and battery care

Charge on a hard surface where you can keep an eye on it, not on a couch or bed, and unplug when it is full. Use the charger that came with it. Stop using and charging a device that is swollen, damaged, smells odd or runs unusually hot, and contact the maker. If it is bulging, smells or feels extremely hot, turn it off and unplug it, move it away from anything flammable if that is safe, leave the area and call 911.

E-rig errors in general terms

Every brand has its own light codes. Check your manual for exact meanings, or see our guides to Peak Pro lights and Switch² lights. Most errors come down to a few causes:

  • Low battery. Charge it fully.
  • Atomizer not seated. Remove and reinstall the chamber the way your manual shows, without forcing it.
  • Dirty contacts. Clean the metal contacts with a dry swab, or a lightly damp one with isopropyl, and let it dry.
  • Overheated. Let the device cool down. Do not use it in direct sun.
  • Chamber worn out. Replace the chamber.

For a step-by-step fix, try the fix my dab troubleshooter, which has an e-rig path.

E-rig vs torch and banger

E-rigTorch and banger
Ease of usePush a buttonTakes practice
ConsistencySame every timeDepends on you
Flavor controlPresets or appTotal control with practice
Upfront costHigherLower
Ongoing costChambers, batteriesButane, bangers
PortabilityGoodAwkward
FireNo open flameOpen flame

If you dab daily at home and like to tinker, a torch and banger gives you more control for less money. If you want easy, consistent dabs, especially in a small apartment where an open flame feels sketchy, an e-rig is worth it.

Either way, the dab temperature guide explains what different heats do to flavor, and that applies to both.

Also useful: Dab safety, Shopping for dab gear in LA, E-rig vs torch and banger, Peak Pro 3DXL vs Switch².

Sources